Tools

Genuine BMW # 83300490856

Removes pilot bearings and bushings precisely and easily.

Threaded adapter for use with the CTA Tools radiator pressure tester.

Solid protection for the cylinder head intake and exhaust ports on S54 engine.

Solid protection for the cylinder head intake and exhaust ports on M5X and S50/S52 engines.

Original BMW removal tool for plastic oil filter cap on N20, N26, N51, N52, N54, N55, S55, N63TU, and N74 engines.

Cost-effective tool required to unlock, raise and lower MCS spring perches

Tool for releasing the lock detent when removing the ignition lock.

Set of 2 plastic hood support extenders for improved access to the engine bay.

2" glow-in-the-dark face, 0-60psi, and quick-release button

Are you prepared for a medical emergency? This Genuine BMW kit provides basic items and information for when you need it. 

Upgraded and premium wheel pin tool that screws into the hub.

Upgraded and premium wheel pin tool that screws into the hub.

Adapt any Motive brake pressure bleeder to work on most import cars

Quickly and easily pushes the exhaust bracket out of the rubber isolator/hanger.

Factory wheel pin tool that slides into the hub. Genuine BMW part #71111093774.

Heavy duty CV joint pliers for installation of clamps on CV boots and steering tie rod boots.

Upgraded and premium wheel pin tool that screws into the hub. Replaces BMW part #71111093774.

Ultra-bright CREE LED flash light with a pivoting head, magnetic base, and doubles as a lantern with the side light activated

Designed for adjusting MCS spring perches and lock plates

Replacement rod for our BimmerWorld E36/E46 Trailing Arm Bushing Tool.

Factory jacking point for 3 Series Coupes 2007-2013

Set of 8 double-ended plastic prying and scraping tools.

Adapt any Motive brake pressure bleeder to work on your European car

Remove interior and exterior plastic fasteners and moldings with this set of pry tools.

Budget-minded tool for rear bushings or bearings

Adapter that is ideal for vintage BMWs and the pinch seam on the rocker panel

Floor jack adapter to lift your newer BMW safely and securely

Makes bushing replacement easy - for use with E30, E36, E46 and Z3/Z4

Double-ended metal pry tool for removal of body trim.

Extended-length plastic pry tool for interior trim, body moldings, and plastic fasteners.

Set of 5 plastic pry tools for pushing and pulling wiring without damage to the wire insulation.

Easily remove wiper arms from the drive motor assembly.

Temporarily close rubber brake/coolant/vacuum hoses without damaging them.

Universal transmission filler adapter with 8-inch long hose.  Use with CTA 7400 ATF Filling System.

Transmission filler adapter for ZF automatic transmissions.

Set of 2 L-shaped plastic pry tools for leverage in hard-to-reach areas.

Bleed your brakes without any mess!

Replaces BMW # 51717237195 and 51717123311

Required to align clutch disc during installation