Engine Tools

Splined tool for removal of Bosch free-wheel alternator pulleys.

Temporarily close rubber brake/coolant/vacuum hoses without damaging them.

Torque angle meter for properly setting torque-to-yield bolts.

CTA Tools Radiator Pressure Test Pump with Gauge - CTA-7060

Threaded adapter for use with the CTA Tools radiator pressure tester.

Removes pilot bearings and bushings precisely and easily.

Small jaw for CTA-8070 puller tool. Sold individually.

Holds the engine internals in proper alignment when changing the timing chain on N20/N26 models with automatic transmission.

Specialized tool for threading the VANOS actuator into place on B38, B46, B48, B58, B58tu, S63M, and S68T engines.

Tool for installation of stretch-type AC belts on models without a belt tensioner.

Tensioner release tool for removal and installation of the alternator belt.

Holds the engine balancing shaft in position when replacing the oil pump  components.

Combination hand tool fits the 17mm  and 14mm oil drain plug on many European engines and transmissions.

Locks the flywheel position when the manual transmission is removed.

Removes and installs the fan clutch onto the water pump threads.

Set of extended-length torx bit sockets for easy access to cylinder head bolts on N51/N52/N54/N55 engines.

1-inch wide scraping tool with a comfortable plastic handle.

Tool set for correctly setting the timing position on the M52TU, M54, and M56 engines.

Flat spanner wrench with a long handle for reaching the 32mm nut between the fan clutch and water pump.

Splined tool set for removal of free-wheel pulleys from Bosch and Denso brand alternators..

Quickly and easily test the condition of coolant and anti-freeze solutions.

Use for proper disassembly of counter-balance shaft gears on BMW B38, B46, and B48 engines.

Extended-length spark plug tool with a built-in swivel for easy access to engine spark plugs.

Extended offset socket wrench set for access tp fuel lines, steering fittings, AC hoses, and more.

Locate air leaks in turbocharger unit and related components.

Lock and unlock reusable Clic and Clic-R clamps on coolant and hydraulic hoses.

Extended length 5/8" socket with knurled grip for easy removal and installation of spark plugs.

Solid protection for the M20 cylinder head intake, exhaust, and coolant ports.

Solid protection for the cylinder head intake and exhaust ports on M5X and S50/S52 engines.

Solid protection for the cylinder head intake and exhaust ports on S54 engine.

High quality, 24 Month Warranty

Long-handle crankshaft holder tool for BMW N51, N52, and N54 engines.