|
This tool is used for the accurate tightening of head bolts and manifold bolts, when a torque angle is required by the manufacturer's specification. This procedure is common for torque-to-yield "stretch" fasteners. Example: "Torque to 90 lb/ft plus 90 degrees"
Compatible with any 1.2" square drive ratchet, torque wrench, or breaker bar.
$13.56
CTA Tools Torque Angle Meter - 1/2-inch Drive - CTA-8980
Torque angle meter for properly setting torque-to-yield bolts.
|
|
|