Twin Disc E46 M3 6-Speed Ultra-Lite Clutch/Flywheel

Reduce rotating mass and increase shifting speed, acceleration, and power to the wheels in your E46 M3

+ -
+ -
+ -
+ -
+ -
+ -
+ -
+ -

  •  

Price:
$1,717.00

The BimmerWorld View - Tilton makes pro-race-quality parts and has been a part of BMW's factory racing programs for decades. This clutch package is not only very light, but the Cerametallic material also means it's durable and will last many seasons of use, even if you need to slip the clutch once in a while (loading the trailer, etc). This is our favorite option for a super light, very low-maintenance racing clutch/flywheel.
 
Our Tilton Twin Disk M3 Ultra-Lite Clutch/Flywheel Kit replaces your 6-speed E46 M3's clumsy and heavy stock parts with a 16.2 pound assembly, including clutch! This cuts a lot of weight out of the rotating assembly, and that not only means less weight in the car, but weight that the engine no longer needs to spin up to accelerate. As a result, you get less driveline loss and more power to the wheels, as well as faster shifting for more time under power and higher top speeds on the straights. 

This system was designed by Tilton in conjunction with BimmerWorld to meet the demands of the typical racer in a moderately- to high-powered E46 M3. The twin-disc Cerametallic clutch material has a much longer service life than pure metallic discs and allows some level of modulation, as well as less pedal effort because of the lighter pressure plate. The 184mm (7.25") clutch diameter adds to ease of use, and the steel flywheel allows a thinner starter ring so weight is more centralized, further reducing moment of inertia for even quicker-revving performance.  

Recommended for full race/track cars, but suitable for light street use if you don't mind very track-focused manners. Fits E46 M3 (S54-based engines) with 6-speed transmissions only.

Kit includes flywheel, clutch, annular throw-out bearing, and hardware. A Torx T-60 socket is required for installation (non-standard socket)
, as well as trimming of the input shaft guide tube.

Made in USA


BMW Fitments:

3 Series
E46 (99-05) > M3
Recently Viewed Products