Special Deal! Use Code FREESHIP for free UPS in the lower 48!">

BimmerWorld TA16 18x9.5 ET22 Forged Race Wheel Set (Gloss Black)

18x9.5" Gloss Black forged square set for track or race

Special Deal! Use Code FREESHIP for free UPS in the lower 48!

+ -
+ -
+ -
+ -
+ -
+ -
+ -
+ -



The 18x9.5" ET22 is an ideal wheel size and offset for E46 M3, E90 E92 M3, and E82 1M. Since understeer is built-in thanks to a narrower front tire, adding more rubber in the front is the simplest and most straight-foward way to reduce it. Our TE:AL (Technical Alloy) alloy wheel is constructed as a true forged piece, not "semi-forged" or "flow-forged". A fully forged wheel is stronger and lighter than cast wheels (a semi-forged wheel is still cast). The BimmerWorld racing team has been using forged wheels in multiple types of racing and we're convinced that forged wheels have greater all-around benefits than cast wheels. Because these are our own proprietary wheel, we're able to offer them at roughly half the cost of other forged race wheels in the BMW market!

The BimmerWorld TA16 wheel is 18x9.5" with a ET22 offset and weighs less than 19lbs. The 9.5" wheel accepts a 255-275 track tire with ease and less chance of rubbing than with a 18x10" wheel. The 16 spokes and barrel design leave generous room for big brakes - up to 380mm. BimmerWorld wheels utilize the most advanced wheel design and manufacturing techniques available in the world to make the strongest, lightest wheel possible. Through careful design using CAD and FEA we were able to trim material to make a lighter wheel without sacrificing strength. We also incorporated several unique features normally found on high-end race wheels - knurled bead seat to minimize the wheel spinning inside the tire and a reverse-mount feature that makes it easier for race tires to be mounted from the backside of the wheel.

Key Features:

  • Ridged cross-spoke design and internal outer-barrel strengthening rib for ultimate strength, rigidity/camber stiffness, and durability

  • Massive Caliper Clearance - 18" versions fit up to 380mm brakes

  • Pocketed center pad to minimize weight without compromising strength

  • Machined from T6061 aluminum forgings, produced with an industry-leading 10,000 ton press for optimized grain flow

  • Shot peened and heat treated for exacting strength and increased durability

  • Gloss finish is easy to clean

  • Knurled bead seat to minimize tire slippage with higher-powered cars and under heavy braking

  • Accepts BMW factory center cap (not included)

  • Optimal tire sizes: 255/35-18, 265/35-18, 275/35-18

  • Reverse mount

  • Limited lifetime warranty

BimmerWorld TA16 wheels have gone through rigorous testing and certification by JWL/VIA and proven at all levels of competitive racing, including years of wheel-to-wheel (literally) IMSA pro racing.

Note: these are sold as a race-fitment only and rubbing with bodywork may occur depending on tire choice and suspension settings. We cannot verify fitment with every combination of wheel-tire-suspension. Verification of wheel fitment is the responsibility of the customer. Please contact us directly if you have any questions or concerns. Returns are limited to quality issues only.

Note: We have sized these wheels so they should not require spacers for most applications. However, when spacers are necessary pay close attention to the fitment of the spacer to the inside of the wheel. The spacer must sit completely flush to the back of the wheel with zero gap. Our wheels are not compatible with 10mm spacers. For 12mm spacers check fitment closely as the chamfer on the spacer may not fit with the wheel. Use the paper test to confirm.

BMW Fitments:

1 Series

E82 (11-12) > 1M (11-12)
3 Series
E46 (01-06) > M3
3 Series
E90 / E92 / E93 (08-13) > M3
Recently Viewed Products