H&R 18mm Wheel Spacers for BMW 5x112 Wheels

18mm BMW H&R wheel spacer for 5x112 BMW models with 66.5mm center bore. This is the new BMW wheel spec that all G-series BMW models use including, G01 X3, G02 X4, G05 X5, G12 7-series, G20 3-series, G22 4-series, G80 M3, G82 M4, G29 Z4, and G30 5-series.

A 18mm spacer is a direct fit on BMW G-chassis models. Longer wheel bolts are absolutely required with these spacers, unless wheel studs are used.

Please measure your wheel gap before ordering spacers. Wheel spacers ARE NOT RETURNABLE if packaging is opened. Thoroughly clean the hub surface and brake rotor hat before mounting. Rust and other debris may interfere with spacer fitment. The spacer must be fully seated against the brake rotor hat (not bottomed-out on the lip). Ensure the bolt is fully engaged before use - 14x1.25 wheel bolts require 9.0 turns or 14mm of engagement to be considered fully tight. Do not use anti-seize on bolt threads and torque bolts to 88ft-lbs. Spin wheel to ensure longer wheel bolts do not interfere with hub internals.

BMW Fitments:

3 Series
G20 (2019+) > 330i
G20 (2019+) > 330i xDrive
G20 (2020+) > M340i
G20 (2020+) > M340i xDrive
5 Series
G30 (2017+) > 530i
G30 (2017+) > 530i xDrive
G30 (2017+) > 540i
G30 (2017+) > 540i xDrive
G30 (2017+) > M550i xDrive
5 Series
F90 (2018+) > M5
F90 (2019+) > M5 Competition
6 Series
G32 / G33 (2018+) > 640i
G32 / G33 (2018+) > 640i xDrive
7 Series
G11 / G12 (2016+) > 740i
G11 / G12 (2016+) > 740Li
G11 / G12 (2016+) > 750i
G11 / G12 (2016+) > 750Li
G11 / G12 (2016+) > M760Li
8 Series
G14 / G15 (2019+) > 840i
G14 / G15 (2019+) > 850i
X Series
G01 (2018+) > X3 xDrive30i
G01 (2018+) > X3 M40i
X Series
G02 (2019+) > X4 xDrive30i
G02 (2019+) > X4 M40i
X Series
G05 (2019+) > X5 xDrive40i
G05 (2019+) > X5 xDrive50i
Z Series
G29 (2020+) > Z4 sDrive30i
G29 (2020+) > Z4 MDrive40i