This pair of 12mm BMW H&R wheel spacers is designed for use on BMW wheels with the 5x120 bolt pattern and 74mm center bore. This is the BMW wheel spec used on 2007-2018 E70/F15 X5, 2015-2018 F85 X5M, 2008-2019 E71/F16 X6, and 2015-2019 F86 X6M models.
Caution: Some E70 X5 and E71 X6 models have mixed front and rear hub sizes. On some models, the front axle has a 74.0mm hub, while the rear axle uses a different 72.5mm hub. Later versions had 74.0mm hubs on both the front and rear axles.
Longer wheel bolts are absolutely required with these spacers, unless wheel studs are used.
Please measure your wheel gap before ordering spacers. Wheel spacers ARE NOT RETURNABLE if packaging is opened. Thoroughly clean the hub surface and brake rotor hat before mounting. Rust and other debris may interfere with spacer fitment. The spacer must be fully seated against the brake rotor hat (not bottomed-out on the lip). Ensure the bolt is fully engaged before use - 14x1.25 wheel bolts require 9.0 turns or 14mm of engagement to be considered fully tight. Do not use anti-seize on bolt threads and torque bolts to 88ft-lbs. Spin wheel to ensure longer wheel bolts do not interfere with hub internals.
BMW Fitments:
X5 Series
E70 X5 (07-13) > X5 M (10-13)
X5 Series
F15 X5 (2014-2018) > X5 sDrive35i (14-18)
F15 X5 (2014-2018) > X5 xDrive35d (14-18)
F15 X5 (2014-2018) > X5 xDrive35i (14-18)
F15 X5 (2014-2018) > X5 xDrive50i (14-18)
X5 Series
F85 X5 M (2015-2018) > X5 M (15-18)
X6 Series
E71 X6 (2008-2014) > X6 M (10-14)
X6 Series
F16 X6 (2015-2019) > X6 sDrive35i N55 (15-19)
F16 X6 (2015-2019) > X6 xDrive35i N55 (15-19)
F16 X6 (2015-2019) > X6 xDrive50i (15-19)
X6 Series
F86 X6 M (2015-2019) > X6 M (15-19)
