Our BimmerWorld Chrome 4 Lug Wheel Stud Package is designed specifically for street and track enthusiasts looking for strong wheel hardware at a reasonable price.
Our wheel studs are made from 10.9 grade 39NiCrMo3 steel, similar to the quality of original wheel hardware. The studs have a black zinc-nickel electroplating for long life and good looks. Our bullet nose tip design makes for quick and easy thread starts, and the added length is designed to incorporate up to 12mm in spacer thickness while retaining full thread penetration at the nut. The chrome wheel nuts are zinc coated to resist corrosion, and they have a M12x1.5 thread and 60 degree taper to fit all BMW-applicable wheels.
Fits all 4-lug 3-Series, including E21 and E30. May also work with other BMWs that use M12x1.5 threads (minus one stud per wheel). Loctite sold separately and strongly recommended.
Package includes:
75mm Bullet Nose wheel stud x 16
17mm chrome zinc coated lug nut x 16
17mm jam nuts for installation x 2
Nut Thread Length
Hub Thread Length
Hub Face to Stud Nose
Maximum Spacer Thickness
40mm
13mm
62mm
12mm
“What is the BMW wheel nut torque?” Our torque spec for wheel nuts (not bolts) is 75ft-lbs done when the nuts and wheel are cold (ambient temp). Do not torque when the nuts are hot and do not exceed 75ft-lbs. Remember that nuts - and studs - are consumables and should be inspected and replaced periodically. See our instructions link above for complete stud and nut installation guidelines.
