APEX VS-5 19" flow-formed wheels in sizes that are aggressive fitments for F3X, E9X, E46, and E36*.
19x8.5 ET35
19x9.0 ET30
19x9.5 ET35
19x10.0 ET40
These widths and offsets are likely to be aggressive for the models listed below. Contact us if you would like any guidance on wheel sizing and fitment.
The VS-5 APEX wheel combines their flow-forming wheel manufacturing with the dynamic and striking split-5 spoke wheel design. Each of the spokes features "I-beam" finish machining that shaves weight without affecting strength. The profile of the spokes has been optimized for each offset and width to allow generous clearance with big brake kits and optimal strength.
The APEX VS-5 wheel achieves its combination of strength, light weight, and affordability through flow-forming technology. By flow-forming the wheel, weight is reduced in the barrel through a process sometimes referred to as "rotary forging." Rotary forging, while not the same as the traditional forging, is superior to regular casting. The rolling process occurs under extreme pressure, yielding a barrel that is stronger than a standard cast wheel, with certain material properties that are similar to a standard forged wheel. This added barrel strength allows for a reduction in overall wheel weight, while not sacrificing any of the strength you'd expect from durable flow-formed wheels.
Thanks to its lightweight barrel and robust face design, the VS-5 stands up well against the rigors of endurance racing, as well as your average street potholes.
Features:
+ I-beam spoke design - less mass while retaining strength
+ Flow-formed, roll forged barrel - superior strength and reduced weight
+ Clears OE F8X and M Sport brakes
+ Excellent clearance for aftermarket big brake kits
+ Accepts OEM BMW center caps
+ Accepts factory lugs, wheel locks, or stud conversions
+ Tire pressure monitoring system (TPMS) compatible - not included
Priced per wheel (individually).
*Fitment Note: we do our best to display wheels that fit your BMW model, based on your model selection. Wheels with aggressive fitments or tight clearances may also be listed. Many variables must be considered for wheel fitment, especially when using larger wheels or different offsets. These variables include: suspension type and settings, ride height, tire size, bodywork changes, and alignment settings. In some cases, additional parts or modifications may be necessary for fitment that may not be listed in our catalog. These wheels, like many wheels, are not compatible with 10mm wheel spacers. We recommend using 12mm spacers, as 10mm hubcentric spacers have inherent design limitations that prevent them from sitting flush. Final wheel fitment and clearance is the responsibility of the customer, however, we welcome your questions on fitment, size, offset, or other wheel-related inquiries. Wheel returns are limited to quality issues only.
BMW Fitments:
3 Series
E36 (92-99) > 318i
E36 (92-99) > 318ic
E36 (92-99) > 318is
E36 (92-99) > 323ic
E36 (92-99) > 323is
E36 (92-99) > 325i
E36 (92-99) > 325ic
E36 (92-99) > 325is
E36 (92-99) > 328i
E36 (92-99) > 328ic
E36 (92-99) > 328is
E36 (92-99) > M3
3 Series
E46 (99-06) > 323i
E46 (99-06) > 323ci
E46 (99-06) > 325i
E46 (99-06) > 325ci
E46 (99-06) > 325xi
E46 (99-06) > 328i
E46 (99-06) > 328ci
E46 (99-06) > 330i
E46 (99-06) > 330ci
E46 (99-06) > 330xi
3 Series
F30 / F31 / F34 (12-18) > 320i
F30 / F31 / F34 (12-18) > 320i xDrive
F30 / F31 / F34 (12-18) > 328d
F30 / F31 / F34 (12-18) > 328d xDrive
F30 / F31 / F34 (12-18) > 328i
F30 / F31 / F34 (12-18) > 328i xDrive
F30 / F31 / F34 (12-18) > 330i
F30 / F31 / F34 (12-18) > 330i xDrive
F30 / F31 / F34 (12-18) > 335i
F30 / F31 / F34 (12-18) > 335i xDrive
F30 / F31 / F34 (12-18) > 340i
F30 / F31 / F34 (12-18) > 340i xDrive
4 Series
F32 / F33 / F36 (14-20) > 428i
F32 / F33 / F36 (14-20) > 428i xDrive
F32 / F33 / F36 (14-20) > 430i
F32 / F33 / F36 (14-20) > 430i xDrive
F32 / F33 / F36 (14-20) > 435i
F32 / F33 / F36 (14-20) > 435i xDrive
F32 / F33 / F36 (14-20) > 440i
F32 / F33 / F36 (14-20) > 440i xDrive
