Thie set of staggered 19' EC7 wheels is finished in Anthracite paint, and fits F87 M2 and M2 Competition (2016, 2017, 2018, 2019, 2020+).
- Front Wheels: 19x9.5 ET28 (265/30R19 tire recommended)
- Rear Wheels: 19x10.5 ET45 (295/30R19 tire recommended)
The EC-7's spoke profile has been designed with a curve to provide additional caliper clearance, clearing larger brakes like the F87 M2 Competition - without spacers
- where other wheels will not.
The EC-7 achieves its combination of strength and light weight through flow-forming technology. By flow-forming the wheel, weight is reduced in the barrel through a process sometimes referred to as "roll forging." Roll forging, while not the same as the traditional forging, is superior to regular casting. The rolling process occurs under extreme pressure, yielding a barrel that is stronger than a standard cast wheel, with certain material properties that are similar to a standard forged wheel. This added barrel strength allows for a reduction in overall wheel weight, while not sacrificing any of the strength you'd expect from durable flow-formed wheels.
Thanks to its lightweight barrel and robust face design, the EC-7 stands up well against the rigors of endurance racing, as well as your average street potholes.
Priced as a set of 4. Apex wheel center caps included. BMW center caps sold separately.General Fitment Note:
these are sold as a race-fitment only and rubbing with bodywork or on suspension may occur depending on tire choice and suspension settings. We cannot verify fitment with every combination of wheel-tire-suspension. These wheels, like many wheels, are not compatible with 10mm wheel spacers. We recommend using 12mm spacers, as 10mm hubcentric spacers have inherent design limitations that prevent them from sitting flush. Verification of wheel fitment is the responsibility of the customer. Please contact us directly if you have any questions or concerns. Returns are limited to quality issues only.
F87 M2 Competition S55 (2019+)
F87 M2 N55 (2016-2018)