This set of 18" silver staggered TA5R wheels fits the F87 M2 Coupe (2016, 2017, 2018). The front wheels are 18x9.5 ET35 and the rear wheels are 18x10.5 ET36. Spacers for the front wheels are required
to clear the strut. Without the spacers the front wheels will rub on the strut body. Spacer size will vary depending on the front strut brand - 5mm for stock struts, 10-12mm or more on coil overs. We recommend using 12mm spacers, as 10mm hubcentric spacers have inherent design limitations that prevent them from sitting correctly on the hub. See below for product link.
The TA5R sets new standards for flow-formed track wheels with superior strength, light weight, huge brake clearance, and affordable. The TA5R has greater strength and more reinforcement in critical areas: more material in the outer lips, a closed-face hub, and spokes that extend to the outer lip. These features, plus the latest flow-forming manufacturing, have produced a wheel with a load rating of 720kg (1,587lbs), which is higher than other so-called track wheels.
Flow-forming and precise machining also produce a light wheel - the 18x9.5 sits on our scales at 19.58lbs. The TA5R has been fatigue and impact tested and exceeds SAE, JWL, and VIA standards. Flow-forming is a manufacturing process with a tighter grain structure than casting that makes the wheel stronger, similar to a true forged wheel. The superior process far surpasses older manufacturing that use a straight casting process.
The wide-V-spoke design stretches all the way to the outer lip, a key component to the TA5R's strength. They also allow tremendous caliper clearance behind the spokes. 18" sizes clear all 355mm brakes (Brembo F40, Monobloc, ST40, ST60) plus StopTech ST60 380mm kit and stock F8X M3/M4 iron brakes (not CCB). This wheel is not for the M2 Competition or those brakes retrofitted to a non-Comp model.
Thanks to its lightweight barrel and robust face design, the TA5R stands up well against the rigors of endurance racing, as well as your average street potholes. The 18" TA5R features a load rating of 1,587lbs.
- Wide V-spoke design out to the outer lip - superior strength
- Flow-formed, roll-forged barrel - high strength but low weight
- Reinforced inner lip for added strength over curbs
- Knurled bead seat reduces tire slippage
- Huge spoke clearance for big brake kits
- Closed-face hub maximizes strength in the hub
- Accepts OE BMW center cap (TA5R cap included)
- Accepts factory lug bolts, wheel locks, or stud conversions
- 32mm lug hole accommodates 19mm sockets
- Protective recessed valve stem pocket
- Tire pressure monitoring system (TPMS) compatible (not included)
Priced as a set of 4 wheels.Fitment Note:
we do our best to display wheels that fit your BMW model, based on your model selection. Wheels may be listed that are considered aggressive fitments or tight clearances for a particular model. Many variables must be considered for wheel fitment, especially when using larger wheels or different offsets. These variables include: suspension type and settings, ride height, tire size, bodywork changes, and alignment settings. In some cases, additional parts or modifications may be necessary for fitment that may not be listed in our catalog. Final wheel fitment and clearance is the responsibility of the customer, however, we welcome your questions on fitment, size, offset, or other wheel-related inquiries. Wheel returns are limited to quality issues only. These wheels are compatible with 10mm spacers, however, 12mm is a better choice due to known design limitations of 10mm spacers.
Need help deciding on a size or offset for your BMW? No problem! Give us a call at 877.639.9648 or email us at [email protected]
for assistance. We're your BMW wheel experts and are happy to help.
BMW Fitments:2 Series
F87 (16-18) > M2