The Verus Engineering Dual Dive Planes Kit for the BMW G80/G82 M3/M4 was specifically designed to increase front-end downforce while keeping drag increase to a minimum. The units work together to aid in extracting airflow from the wheel well, as well as producing downforce on the front axle of the car. This design was tested in CFD modeling and was found to be the most beneficial, even when compared to GT4 M4 style canards or dive planes.
The dive planes produce a safe aero balance with or without the addition of our rear diffuser. These units were designed in CAD using in-house scan data and optimized using CFD analysis.
These units are constructed from 1.5mm thick pre-preg, autoclaved cured, 2x2 twill carbon, with a polished, high gloss finish.
Dive planes, also referred to as canards, allow you to shift the aero balance forward, possibly aiding you and your setup in balancing out a large rear wing, diffuser, or aiding with front grip in on track.
Kit Contents:
- Dive Plane, Right-Hand Top
- Dive Plane, Left-Hand Top
- Dive Plane, Left-Hand Bottom
- Dive Plane, Right-Hand Bottom
- Install Template
- 3M VHB Tape (6 Pieces Total)
Product Features:
- Reduce lift (increase downforce)
- Shift aero balance forward
- Evacuate air from the front of the wheel well
Click here for Verus Installation Instructions PDF
BMW Fitments:
3 Series
G80 (2021-) > M3 (2021-)
G80 (2021-) > M3 Competition RWD (2021-)
G80 (2021-) > M3 xDrive Competition (2021-)
4 Series
G82 / G83 (2021-) > M4 (2021-)
G82 / G83 (2021-) > M4 CSL
G82 / G83 (2021-) > M4 Competition RWD (2021-)
G82 / G83 (2021-) > M4 xDrive Competition (2021-)
