The Verus Engineering front splitter endplates are designed to increase front end downforce even further on the Verus front splitter without a large increase in drag. The vents are specifically designed to reduce drag while keeping downforce where it needs to be.
This set of endplates are 3D printed in carbon nylon, which offers a great surface finish and an excellent strength-to-weight ratio.
These endplates are perfect for the owner that is looking for a more aggressive front end appearance and improved front end downforce.
Kit Contents:
- Carbon Nylon 3D Printed, Right-Hand Side Endplate
- Carbon Nylon 3D Printed, Left-Hand Side Endplate
- Installation Kit (Stainless Steel Hardware)
Product Features:
- CFD Optimized Design
- Increase Front-End Downforce
- Improved Overall Aerodynamic Efficiency
- Reduce Lap Times
The Verus Engineering Endplates are designed to increase front-end downforce for those that need additional grip at high rates of speed. They do this by increasing the pressure delta between the top surface of the splitter and the bottom surface of the splitter.
These endplates are part of the Ventus 2 aerodynamic package which produces a significant amount more downforce than the factory. The goal with the Ventus 2 kit was to dramatically improve the aerodynamic performance of the BMW G87 M2 in a balanced and safe way. All the Verus aerodynamic components were designed to work together as a complete package.
Click here for Verus Installation Instructions PDF
Click here for Verus Ventus System Information PDF
BMW Fitments:
2 Series
G87 (2023-) > M2 (2023+)
