Brake Pad Wear Sensor, Aftermarket - E30, E28, E24

Replacement wear sensor for brake pads - Required when low-brake warning light is illuminated

+ -
+ -
+ -
+ -
+ -
+ -
+ -
+ -



This part is listed by BMW as BMW part number 34351179819 (34-35-1-179-819) and is described as Brake Pad Wear Sensor for E21, E12, E28, E24, and E23.

Depending on application, this sensor may be used on the front or rear position.

Detailed fitment list:
E30 318/325: Rear Only
E30 M3: Front/Rear
E28 524/528/533/535: Front Only
E24 630CSi: Front/Rear
E24 633/635/M6: Front Only

Brake Wear Sensors are key safety components that allow worry-free driving without the need for constant visual inspection of your brake pad material. Once the brake lining dash light is illuminated on your dash, this is a warning of thin brake pad material. Pads should be replaced as soon as possible, and the sensor is a required replacement once the brake lining dash has come on.

  • Precise factory fitment
  • Worry-free driving until dash light illuminates
  • One sensor required per axle 
TECH NOTE: On a majority of applications the brake lining light can be reset easily by installing a new sensor and turning the ignition to the second position (without starting the car) for approximately one minute - or until the light goes out. Refer to your Bentley service manual for further instruction if this method doesn't work.

Supersedes the following BMW part numbers:
34351180782 (34-35-1-180-782)
34111152607 (34-11-1-152-607)

For full BMW fitment information or for assistance from one of our BMW experts, we recommend calling us at 877-639-9648.

BMW Fitments:

3 Series
E30 (84-91) > 318i
E30 (84-91) > 318is
E30 (84-91) > 325e
E30 (84-91) > 325es
E30 (84-91) > 325i
E30 (84-91) > 325is
E30 (84-91) > 325ix
E30 (84-91) > M3
5 Series
E28 (82-88) > 524td
E28 (82-88) > 528e
E28 (82-88) > 533i
E28 (82-88) > 535i
6 Series
E24 (77-89) > 630CSi
E24 (77-89) > 633CSi
E24 (77-89) > 635CSi
Recently Viewed Products