Front Control Arm Bushings, Offset Rubber, BMW - E30, E36, Z3

Offset control arm bushings change the orientation of the control arm by adding more caster and negative camber. The solid rubber design has less deflection than a webbed rubber bushing. This helps to improve handling and steering response. The standard bushings have the hole in the center. Offset bushings move the hole to the outside which pushes the wheel/hub further forward (caster) and more to the outside (camber). Offset bushings were standard on the E30 M3 Evo models and the 1995 E36 M3 but can be installed on other E30, E36, Z3 models too. Urethane bushings are also available for even more performance improvement.

Offset Bushing Considerations: Too much caster can make the steering too quick and make the car feel "darty" as well as push the wheel too far forward in the wheel well. 1996-1999 E36 M3 stock control arms with these bushings creates too much caster but may be necessary if using a different control arm.

Price is for the pair. This item includes both left and right side (driver and passenger side) control arm bushings. 

This is the Genuine BMW paid of control arm bushings, the same as you might find at a dealer (but delivered to your home or workshop). As the Original BMW part, you're assured the same level of performance requirements as well as this part's German TUV approval. Like most Genuine BMW parts, these bushings have a two year warranty from BMW.