Front Tension Strut Bushings (FCAB), Powerflex - F10 5-series, F06/F12/F13 6-series RWD

Powerflex urethane bushings replace the failure-prone rubber hydrobearing on the F10 528i/535i/550i and F06/F12/F13 640i/650i models. These urethane bushings have an offset orientation which adds 0.5° more caster to the front alignment (as well as a small increase in negative camber). This will slightly increase stability by making the wheel return to center with more force as well as improve handling. These are a great performance alternative to the stock bushings, which are not available without purchasing a complete new arm.

The stock rubber bushings are filled with a vibration-absorbing fluid that leaks or evaporates over time. This leaves the bushing wobbly and with far too much slop and play that makes the car feel vague and unstable. Urethane bushings from Powerflex have been carefully engineered to work with the rest of the suspension and offer improved steering feedback and stability without impacting ride comfort or noise. They also have a lifetime warranty so you may never have to pay for new bushings again!

These bushings replace the inner rubber bushings on the tension strut, also known as the thrust arm or upper control arm. They add approx 0.5° of positive caster to the alignment. If replacing due to wear, also inspect the outer ball joint of this arm as it may also be in need of replacement.