A convenient package that includes two 20mm hubcentric wheel spacers (for 5x120mm bolt pattern BMWs with 72.56mm center bore) as well as ten (10) Premium wheel studs (to convert from wheel bolts to wheel studs) as well as ten black wheel nuts. This is enough hardware to convert one axle (two wheels, either front or rear).
Video: How To & Tips for BMW Wheel Stud Install
Package Includes:
2 x 20mm black anodized spacer
10 x 92mm BimmerWorld Premium M12 wheel stud
10 x 17mm black wheel nut
2 x Install Nuts
Our BimmerWorld Wheel Spacer Sets are specifically designed to fit your BMW's 72.6 mm center hub, retaining the proper hub centric design while adding highly desired track width. They're designed to work with factory BMW wheels and nearly all aftermarket wheels. Whether you need a spacer set for correct wheel fitment, clearance for a set of big brake calipers or if you just want to widen your track width, we have the correct spacer to fit your needs.
Note: Hub, spacer, and wheel must fit together with zero gap between them. A gap between any component is a cause for failure. Check for a snug fitment with no wobble on each component. Click this link to learn more and watch a video of our paper test to ensure a proper and safe fitment.
Sold as a set / pair. Enough for two wheels.
For "E" chassis models only. Spacers fit 5-lug BMWs with chassis codes starting with an "e", excluding the E39 5-Series, E83 X3, E53 X5, and any later models who's chassis do NOT start with an "e".
Not for the later "F" chassis which used a large shank wheel bolt in the hub. These will only fit the listed models below. If you're not sure or need help purchasing wheel spacers or wheel hardware, please let us know! Our experts are happy to assist.
