H&R 20mm Spacers With Wheel Hub Adapter (Pair) - 5x120 - E39 5-Series (1997-2003)
E39 20mm/0.79" Hubcentric Spacers Adapt Wheels With 72.5 Center Bore To Fit 74 Center Bore
This Pair of 20mm BMW H&R Wheel Hub Adapters/Spacers can be used for custom wheel fitment on BMW E39 5-Series 525i, 528i, 530i, 540i, and M5.
These spacers have a 74mm inner bore to fit the 5-Series, and a 72.5mm outer hub for fitting custom wheels or factory wheel from other BMW applications
Longer wheel bolts are absolutely required with these spacers, unless wheel studs are used.
Please measure your wheel gap before ordering spacers. Wheel spacers ARE NOT RETURNABLE if packaging is opened. Thoroughly clean the hub surface and brake rotor hat before mounting. Rust and other debris may interfere with spacer fitment. The spacer must be fully seated against the brake rotor hat (not bottomed-out on the lip). Ensure the bolt is fully engaged before use - 12x1.5 wheel bolts require 6.5 turns or 10mm of engagement to be considered fully tight. Do not use anti-seize on bolt threads. Torque bolts to 88ft-lbs. Spin wheel to ensure longer wheel bolts do not interfere with hub internals.
E39 (97-03) > 525i
E39 (97-03) > 528i 97-98
E39 (97-03) > 528i 99-00
E39 (97-03) > 530i
E39 (97-03) > 540i
E39 (97-03) > M5 (00-03)