Our BimmerWorld Wheel Spacer Sets are specifically designed to fit your BMW's 72.6 mm hub, retaining the proper hub centric design* while adding highly desired track width. They're designed to work with factory BMW wheels and nearly all aftermarket wheels. Whether you need a spacer set for correct wheel fitment, clearance for a set of big brake calipers or if you just want to widen your track width, we have the correct spacer to fit your needs.
Precision-machined lightweight design
100% 6061-T6 aluminum alloy - black anodized for corrosion resistance
Spacer thickness clearly marked on rim
Ledge around inner rim for prying off stuck spacers
Machined pocket on inner bearing surface to reduce spacer sticking
Extra large holes to accommodate 12 and 14 mm bolts or studs
Note 1: hub, spacer, and wheel must fit together with zero gap between them. A gap between any component is a cause for failure. Check for a snug fitment with no wobble on each component.Click this link to learn more and watch a video of our paper test to ensure a proper and safe fitment.
Note 2: Due to the thin width of the 5mm spacer, the wheel will rest on the normal hub of the car. Therefore the spacer is designed flat.
Note 3: 10mm spacers are considered a custom fit. If your hub is deeper than 9.5mm the lip will have to be trimmed down. 10mm spacers also do not fit Kosei or TA16 wheels with a 45° chamfer on the back of the mounting hub.
Sold per pair. Spacers fit all 5-lug BMWs excluding the E39 5-Series and X5.
Spacer set does NOT include extended-length bolts - sold separately.
Bolt Thread Length
Correlating Wheel Spacer Width
stock bolt length
Please contact us if you will be incorporating our wheel bolts with spacers of different widths than what is listed.
BMW started changing over wheel bolt size and thread pitch around 2011 (some even earlier). If you are unsure of the size you need, please call for assistance.